[{"id":"5055","visibilidad":"1","nombre":"PEDALS ENDURANCE 6.0 CLIP-IN","precio":"3990.00","precioMayoreo":"0.00","precioFranquicia":"0.00","precioMedio":"0.00","resumen":"A XC and Gravel clipless pedal body CNC-machined out of 6061-T6 aluminum. It utilizes an ultra-robust forged and CNC-machined chromoly steel axle. The fully serviceable triple-bearings system consists of a LSL self-lubricating bushing, a needle bearing, and an industrial roller bearing. Quad seals keep the internals remain dry in any conditions. The dual-sided clip-in system is compatible with classic SPD cleats. The retention system has an adjustable spring tension to finetune entry and relase, while offering 5 degrees of free float.","descripcion":"Main body material: extruded and CNC-machined 6061-T6 aluminum \r\nSmall platform to support the shoe and enhance power transfer\r\nShot-peened anodized surface finish helps improve fatigue and reduces the risk of crack propagation\r\nUltimate durability with Leatt dual seal & triple bearing system\r\nDual-sided clip-in retention system\r\nPositive engagement and feedback \r\nStainless bindings with friction reducing coating\r\nAdjustable spring tension for consistent entry and release \r\n5 degrees of free float\r\nForged and CNC-machined SNCM220 chromoly steel spindles, designed to handle harsh conditions\r\nWeight: 191 grams per pedal, 382 grams per pair","marca":"LEATT","categoria":"COMPONENTS ","grupo":" PEDALS","stock":6,"imagen":"94388.JPG","imagenPadre":null},{"id":"5054","visibilidad":"1","nombre":"PEDALS AllMtn 6.0 CLIP-IN","precio":"4650.00","precioMayoreo":"0.00","precioFranquicia":"0.00","precioMedio":"0.00","resumen":"A Trail and All-Mtn clipless pedal body CNC-machined out of 6061-T6 aluminum. It utilizes an ultra-robust forged and CNC-machined chromoly steel axle. The fully serviceable triple-bearings system consists of a LSL self-lubricating bushing, a needle bearing, and an industrial roller bearing. Quad seals keep the internals remain dry in any conditions. The dual-sided clip-in system is compatible with classic SPD cleats. The retention system has an adjustable spring tension to finetune entry and relase, while offering 5 degrees of free float. The medium platform around the clip-in system provides a solid shoe support for power transfer, and the dropped front portions facilitate shoe entry. Four removable pins increase stability and traction in technical situations when disengaged from the pedal. The pedal is tested and certified to EFBE EPAC All-Mtn TRI-TEST\u00ae standard (category 5).","descripcion":"Main body material: extruded and CNC-machined 6061-T6 aluminum \r\nMedium-sized platform for solid shoe support to enhance power transfer\r\nDropped front portions facilitate shoe entry\r\nPins increase stability and traction in technical situations when disengaged from the pedal\r\nShot-peened anodized surface finish helps improve fatigue and reduces the risk of crack propagation\r\nUltimate durability with Leatt dual seal & triple bearing system\r\nDual-sided clip-in retention system\r\nPositive engagement and feedback \r\nStainless bindings with friction reducing coating\r\nAdjustable spring tension for consistent entry and release \r\n5 degrees of free float\r\nForged and CNC-machined SNCM220 chromoly steel spindles, designed to handle harsh conditions\r\nWeight: 233 grams per pdeal, 466 grams per pair","marca":"LEATT","categoria":"COMPONENTS ","grupo":" PEDALS","stock":3,"imagen":"94386.JPG","imagenPadre":null},{"id":"5053","visibilidad":"1","nombre":"PEDALS GRAVITY 6.0 CLIP-IN","precio":"5150.00","precioMayoreo":"0.00","precioFranquicia":"0.00","precioMedio":"0.00","resumen":"A Gravity clipless pedal body CNC-machined out of 6061-T6 aluminum. It utilizes an ultra-robust forged and CNC-machined chromoly steel axle. The fully serviceable triple-bearings system consists of a LSL self-lubricating bushing, a needle bearing, and an industrial roller bearing. Quad seals keep the internals remain dry in any conditions. The dual-sided clip-in system is compatible with classic SPD cleats. The retention system has an adjustable spring tension to finetune entry and relase, while offering 5 degrees of free float. The large platform around the clip-in system provides a solid shoe support for optimized control and power transfer. The pedal is tested and certified to EFBE EPAC Gravity TRI-TEST\u00ae standard (category 5).","descripcion":"Main body material: extruded and CNC-machined 6061-T6 aluminum \r\nLarge platform provides a solid shoe support for optimized control and power transfer \r\nPlatform and pins offer traction & stability in technical situations when disengaged from the pedal\r\nShot-peened anodized surface finish helps improve fatigue and reduces the risk of crack propagation\r\nUltimate durability with Leatt dual seal & triple bearing system\r\nDual-sided clip-in retention system\r\nPositive engagement and feedback \r\nStainless bindings with friction reducing coating\r\nAdjustable spring tension for consistent entry and release \r\n5 degrees of free float\r\nForged and CNC-machined SNCM220 chromoly steel spindles, designed to handle harsh conditions\r\nWeight: 261 grams per pedal, 522 grams per pair","marca":"LEATT","categoria":"COMPONENTS ","grupo":" PEDALS","stock":6,"imagen":"94383.JPG","imagenPadre":null},{"id":"5052","visibilidad":"1","nombre":"PEDALS CeraMAG ENDURANCE 8.0 CLIP-IN","precio":"6510.00","precioMayoreo":"0.00","precioFranquicia":"0.00","precioMedio":"0.00","resumen":"The CNC-machined, ceramic-coated magnesium pedal body (CeraMAG) and Grade-5 titanium axle keeps the weight low at only 350 grams per pair \u2014 approximately 175 grams per pedal. The fully serviceable triple-bearings system consists of a LSL self-lubricating bushing, a needle bearing, and an industrial roller bearing. Quad seals keep the internals remain dry in any conditions. The dual-sided clip-in system is compatible with classic SPD cleats. The retention system has an adjustable spring tension to finetune entry and relase, while offering 5 degrees of free float. The pedal is tested and certified to EFBE EPAC XC TRI-TEST\u00ae standard (category 3).","descripcion":"CeraMAG - Ceramic coated magnesium alloy\r\nVery light structural metal\r\nHigh strength\r\n100% recyclable\r\nCeramic coating for maximum wear-resistance and corrosion-resistance \r\nSmall platform to support the shoe and enhance power transfer\r\nTitanium spindles and intensive CNC-machine finish to minimize weight\r\nUltimate durability with quad lip seal & triple bearings system (lightweight self-lubricating bushing, needle and sealed ball bearings)\r\nDual-sided clip-in retention system\r\nPositive engagement and feedback \r\nStainless bindings with friction reducing coating\r\nEasy-to-read tension adjuster for consistent entry and release \r\n5 degrees of free float, 15 degree release\r\nEFBE-certified to EPAC XC TRI-TEST\u00ae standard (category 3), tested for a 130kg maximum total weight\r\nWeight: 175 grams per pedal, 350 grams per pair","marca":"LEATT","categoria":"COMPONENTS ","grupo":" PEDALS","stock":5,"imagen":"94381.JPG","imagenPadre":null},{"id":"5051","visibilidad":"1","nombre":"PEDALS CeraMAG AllMtn 8.0 CLIP-IN","precio":"6510.00","precioMayoreo":"0.00","precioFranquicia":"0.00","precioMedio":"0.00","resumen":"The CNC-machined, ceramic-coated magnesium pedal body (CeraMAG) and Grade-5 titanium axle keeps the weight low at only 420 grams per pair \u2014 approximately 210 grams per pedal. The fully serviceable triple-bearings system consists of a LSL self-lubricating bushing, a needle bearing, and an industrial roller bearing. Quad seals keep the internals remain dry in any conditions. The dual-sided clip-in system is compatible with classic SPD cleats. The retention system has an adjustable spring tension to finetune entry and relase, while offering 5 degrees of free float. The pedal is tested and certified to EFBE EPAC XC TRI-TEST\u00ae standard (category 3).","descripcion":"CeraMAG - Ceramic coated magnesium alloy\r\nVery light structural metal\r\nHigh strength\r\n100% recyclable\r\nCeramic coating for maximum wear-resistance and corrosion-resistance \r\nSmall platform to support the shoe and enhance power transfer\r\nTitanium spindles and intensive CNC-machine finish to minimize weight\r\nUltimate durability with quad lip seal & triple bearings system (lightweight self-lubricating bushing, needle and sealed ball bearings)\r\nDual-sided clip-in retention system\r\nPositive engagement and feedback \r\nStainless bindings with friction reducing coating\r\nEasy-to-read tension adjuster for consistent entry and release \r\n5 degrees of free float, 15 degree release\r\nEFBE-certified to EPAC TRI-TEST\u00ae standard (category 5), tested for a 130kg maximum total weight\r\nWeight: 210 grams per pedal, 420 grams per pair","marca":"LEATT","categoria":"COMPONENTS ","grupo":" PEDALS","stock":5,"imagen":"94380.JPG","imagenPadre":null},{"id":"5050","visibilidad":"1","nombre":"PEDALS CeraMAG GRAVITY 8.0 CLIP-IN","precio":"6510.00","precioMayoreo":"0.00","precioFranquicia":"0.00","precioMedio":"0.00","resumen":" \r\n\r\nThe CNC-machined, ceramic-coated magnesium pedal body (CeraMAG) keeps the weight low at only 419 grams per pair \u2014 approximately 210 grams per pedal. It utilizes an ultra-robust forged and CNC-machined chromoly steel axle. The fully serviceable triple-bearings system consists of a LSL self-lubricating bushing, a needle bearing, and an industrial roller bearing. Quad seals keep the internals remain dry in any conditions. The dual-sided clip-in system is compatible with classic SPD cleats. The retention system has an adjustable spring tension to finetune entry and relase, while offering 5 degrees of free float. The large platform around the clip-in system provides a solid shoe support for optimized control and power transfer. The pedal is tested and certified to EFBE EPAC Gravity TRI-TEST\u00ae standard (category 5).","descripcion":"CeraMAG - Ceramic coated magnesium alloy \r\nVery light structural metal \r\nHigh strength \r\n100% recyclable \r\nCeramic coating for maximum wear-resistance and corrosion-resistance \r\nLarge platform provides a solid shoe support for optimized control and power transfer \r\nTraction plate and pins option helps customize your level of traction & stability in technical situations when disengaged from the pedal \r\nForged and CNC-machined SNCM220 chromoly steel spindles, designed to handle harsh conditions \r\nUltimate durability with quad lip seal & triple bearings system (lightweight self-lubricating bushing, needle and sealed ball bearings) \r\nDual-sided clip-in retention system \r\nPositive engagement and feedback \r\nStainless bindings with friction reducing coating \r\nEasy-to-read tension adjuster for consistent entry and release \r\n5 degrees of free float, 15 degree release \r\nTested & certified to EFBE EPAC Gravity TRI-TEST\u00ae standard (category 5) \r\nWeight: 209.5 grams per pedal, 419 grams per pair","marca":"LEATT","categoria":"COMPONENTS ","grupo":" PEDALS","stock":3,"imagen":"94379.JPG","imagenPadre":null},{"id":"5049","visibilidad":"1","nombre":"PEDALS CERAMAG ENDURANCE 8.0Ti CLIP-IN","precio":"8200.00","precioMayoreo":"0.00","precioFranquicia":"0.00","precioMedio":"0.00","resumen":"The CNC-machined, ceramic-coated magnesium pedal body (CeraMAG) and Grade-5 titanium axle keeps the weight low at only 298 grams per pair \u2014 approximately 190 grams per pedal. The fully serviceable triple-bearings system consists of a LSL self-lubricating bushing, a needle bearing, and an industrial roller bearing. Quad seals keep the internals remain dry in any conditions. The dual-sided clip-in system is compatible with classic SPD cleats. The retention system has an adjustable spring tension to finetune entry and relase, while offering 5 degrees of free float. The pedal is tested and certified to EFBE EPAC XC TRI-TEST\u00ae standard (category 3).","descripcion":"CeraMAG - Ceramic coated magnesium alloy \r\nVery light structural metal \r\nHigh strength \r\n100% recyclable \r\nCeramic coating for maximum wear-resistance and corrosion-resistance \r\nSmall platform to support the shoe and enhance power transfer \r\nTitanium spindles and intensive CNC-machine finish to minimize weight \r\nUltimate durability with quad lip seal & triple bearings system (lightweight self-lubricating bushing, needle and sealed ball bearings) \r\nDual-sided clip-in retention system \r\nPositive engagement and feedback \r\nStainless bindings with friction reducing coating \r\nEasy-to-read tension adjuster for consistent entry and release \r\n5 degrees of free float, 15 degree release \r\nEFBE-certified to EPAC XC TRI-TEST\u00ae standard (category 3), tested for a 130kg maximum total weight \r\nWeight: 149 grams per pedal, 298 grams per pair","marca":"LEATT","categoria":"COMPONENTS ","grupo":" PEDALS","stock":2,"imagen":"94378.JPG","imagenPadre":null}]